Fitting Instructions for Boat Trailer Wheel Clamp to Four Winns Boat Trailer Wheel

Published by William Flynn
on March 30, 2016

how to stop thieves stealing your

Four Winns Boat Trailer

This week's article describes how to fit the Australian made Boat Trailer Wheel Clamp to one of the wheels on a Four Winns Boat Trailer.

Four Winns Boat Trailer
protected with
Boat Trailer Wheel Clamp
security option Supreme
also known as Australian Wheel Clamp.

Four Winns Boat Trailer
secured with
Australian Wheel Clamp
security option Supreme.

Four Winns Boat Trailer secured with Australian Wheel Clamp security option Supreme.

Australian Wheel Clamp
security option Supreme.

Australian Wheel Clamp security option Supreme.

Australian Manufacturer Direct Special Offer

Sunday September 25, 2016 between 10.30am to 9.30pm

Scroll down this page to read how much you will save.

Note: Boat Trailer Wheel Clamp has many names depending what it is being sold to secure eg. Australian Wheel Clamp, Caravan Wheel Clamp, 4WD Camper Trailer Security, Trailer Wheel Clamp and others.

Included in this week's article...

  1. How to fit Boat Trailer Wheel Clamp security option Supreme, also known as Australian Wheel Clamp, to a Four Winns Boat Trailer Wheel.
  2. What is the difference between fitting method one and fitting method two.
  3. Why is Boat Trailer Wheel Clamp said to be the world's highest rated Wheel Clamp.
  4. Boat Trailer Wheel Clamp security option Supreme includes Padlock Protection as the locking system.
  5. If you are going to purchase Boat Trailer Wheel Clamp security option Supreme.
  6. How to fit the Boat Trailer Wheel Clamp security option Supreme to Four Winns Boat Trailer using fitting method one.

1: How to fit Boat Trailer Wheel Clamp security option Supreme, also known as Australian Wheel Clamp, to a Four Winns Boat Trailer Wheel.

There are two methods to fit the Australian made Wheel Clamp depending on the Vehicle type. The following list is a guide to indicate whether you use fitting method one or two.

Fitting Method One

  • Caravan
  • Pop Top Caravan
  • Motor Home
  • Boat Trailer
  • Jet Ski Trailer
  • Camper Trailer
  • 4WD Camper Trailer

Fitting Method One

  • Motorbike Trailer
  • Go Kart / Quad Trailer
  • 4WD Vehicle
  • Econovan
  • Ute
  • Flat Top Ute
  • One Ton Flat Top Ute

Fitting Method Two

  • Sedan
  • Hatch Back
  • Station Wagon
  • and any other type of driveable Vehicle not listed.

If you want to read how to fit the Australian made Wheel Clamp please go to Fitting Instructions - opens in a new window. When the page opens scroll down and you will see a list of PDF files for each security option.

Use method one for:

Four Winns Boat Trailer
secured with
Australian Wheel Clamp
security option Supreme.

Four Winns Boat Trailer secured with Australian Wheel Clamp security option Supreme.

2: What is the difference between fitting method one and fitting method two.

Fitting method one is used to secure vehicles that have enough space between the top of the Wheel and the bottom of the Wheel Arch. This allows you to put your hand between to place the 10mm diameter High Tensile Chain under then over the top of the leaf springs or tubular frame as seen in the following picture.

Australian Wheel Clamp security option Supreme.

Australian Wheel Clamp security option Supreme.

Fitting method two is used when you cannot get your hand between the Wheel Arch and the top of the Wheel, see Vehicle list in number one above.

3: Why is Boat Trailer Wheel Clamp said to be the world's highest rated Wheel Clamp.

This Web Site explains why the Australian made Wheel Clamp is completely different compared to all other wheel clamps and has a unique method to fit it to a Wheel and the vehicles chassis.

Following explains the difference.

All other wheel clamps wrap round the width of the Tyre or a bar that goes against the wheel's rim as you can see in the following pictures.

Klamp IT
Klamp It Wheel Clamp

Ark Wheel Clamp
Ark Wheel Clamp

Whereas the Australian Wheel Clamp incorporates a length of 10mm diameter High Tensile Chain that not only wraps round the width of the Tyre it also wraps round the vehicle's leaf spring securing the Wheel Clamp to the vehicle's chassis.

High Tensile Chain
wrapped round leaf springs.

High Tensile Chain wrapped round leaf springs.

Back of Wheel
High Tensile Chain wrapped round leaf springs and Wheel.

Back of the vehicle's Wheel showing how the High Tensile Chain wraps round the leaf springs and the Wheel.

Stainless Steel Shield with
High Tensile Chain.

Australian Wheel Clamp High Tensile Chain passed through the 4 specifically positioned holes in the Stainless Steel Shield and round the leaf springs.

Australian Wheel Clamp
security option Enforcer.

Australian Wheel Clamp security option Enforcer.

Australian Wheel Clamp
security option Supreme.

Australian Wheel Clamp security option Supreme.

Four Winns Boat Trailer
secured with
Australian Wheel Clamp
security option Supreme.

Four Winns Boat Trailer secured with Australian Wheel Clamp security option Supreme.

4: Boat Trailer Wheel Clamp security option Supreme includes Padlock Protection as the locking system.

What is Padlock Protection...

In 2003 we designed a security device to protect a Padlock being broken by the three methods used to break a Padlock, the Steel Shroud (opens in a new window) and named it Padlock Protection.

The three methods thieves use to break a Padlock are:

This is a
leverage attack.
This is a leverage attack, a quick and quite method to break a Padlock of any size.

This is a
hammer attack.
This is a hammer attack, one of three methods to break a Padlock of any size.

Bolt Cutter attack.
Bolt Cutter used to cut a link in Mild Steel Chain or cut the padlock's Shackle.

Steel Shroud, 10mm diameter High Tensile Chain and customised Padlock partially assembled.

Steel Shroud, 10mm diameter High Tensile Chain and customised Padlock partially assembled.

10mm diameter High Tensile Chain cannot be cut with a
Bolt Cutter no matter how long the Bolt Cutter is.

The patented Steel Shroud protects the Padlock being broken and replacing Mild Steel Chain with 10mm diameter High Tensile Chain, that cannot be cut with a Bolt Cutter no matter how long the Bolt Cutter is.

This and other reasons is why Padlock Protection is the highest security rated locking system where a Padlock and Chain is required to STOP a thief breaking into or stealing a valuable possession.

Padlock Protection the worlds
Highest Security Rated Locking System
replacing a Padlock and Mild Steel Chain.

Padlock Protection

Padlock Protection - The customised Padlock and both ends of the 10mm diameter High Tensile Chain secured inside the Steel Shroud.

There is no other security device sold world-wide that completely encloses a Padlock, its Shackle and both ends of the Chain inside a Steel Shroud.
It is: UNIQUE

10mm diameter
High Tensile Chain

10mm diameter High Tensile Chain cannot be cut with a Bolt Cutter no matter how long the Bolt Cutter is.

10mm diameter High Tensile Chain cannot be cut with a Bolt Cutter no matter how long the Bolt Cutter is.

5: If you are going to purchase Boat Trailer Wheel Clamp security option Supreme.

Four Winns Boat Trailer
secured with
Australian Wheel Clamp
security option Supreme.

Four Winns Boat Trailer secured with Australian Wheel Clamp security option Supreme.

Wheel Clamp security option Supreme includes the patented Padlock Protection Steel Shroud locking system (opens in a new window) to secure your towable or drivable Vehicle Wheel but before it can be used as the security option Supreme the 10mm diameter High Tensile Chain may have to be cut to length for your Vehicle type.

You maybe thinking...

Why does the High Tensile Chain have to be cut by the purchaser.

Before we tell you why you need to know...

As soon as you receive your new Wheel Clamp security option Supreme even if you have to cut the Chain to length it can be used to secure your towable or drivable Vehicle before you cut the Chain to length.

How...

The security option Supreme without the patented Steel Shroud is the security option Enforcer. This ensures your towable or drivable Vehicle is protected until you have time to cut the 10mm diameter High Tensile Chain to length.

Australian Wheel Clamp
security option Enforcer.

Australian Wheel Clamp security option Enforcer.

Security Rating
Superior Protection
STOPS all methods opportunistic and smash and grab thieves
use to cut Chain or break a Padlock. This represents about 98% of all thieves.

PLUS
it is QUICK and simple to fit to and remove from a Wheel.

Why we, the manufacturer, cannot cut the Chain to length...

Both ends of the 10mm diameter High Tensile Chain has to go into each side of the Steel Shroud as you can see in the following picture.

Steel Shroud, 10mm diameter High Tensile Chain and customised Padlock partially assembled.

Steel Shroud, 10mm diameter High Tensile Chain and customised Padlock partially assembled.

10mm diameter High Tensile Chain cannot be cut with a
Bolt Cutter no matter how long the Bolt Cutter is.

We do not know...

Try this before cutting the High Tensile Chain...

When you receive your Wheel Clamp security option Supreme follow the fitting instructions to measure the length of Chain you need for your towable or drivable Vehicle and if its just a few links that need cutting off try the following.

On the left or right side of the Wheel remove the Chain from the top hole in the Steel Shield and wrap the Chain over the leaf springs or other part of the chassis again then place the Chain back through the top hole in the Steel Shield, this may save you cutting the Chain to length.

Stainless Steel Shield with
High Tensile Chain.

Australian Wheel Clamp High Tensile Chain passed through the 4 specifically positioned holes in the Stainless Steel Shield and round the leaf springs.

Tip...

The Steel Shield does not have to be tight against the Wheel, there can be 50mm - 100mm between the face of the Wheel and the Steel Shield.

How to cut 10mm diameter High Tensile Chain...

10mm diameter
High Tensile Chain

10mm diameter High Tensile Chain cannot be cut with a Bolt Cutter no matter how long the Bolt Cutter is.

10mm diameter High Tensile Chain cannot be cut with a Bolt Cutter no matter how long the Bolt Cutter is.

There is only one method, a high speed angle grinder. Most people will know someone who owns a high speed angle grinder if not contact any of the following, most suburbs will have the following trades:

When the 10mm diameter High Tensile Chain has been cut to length you are ready to fit the Wheel Clamp security option Supreme to your towable or drivable Vehicle.

Four Winns Boat Trailer
secured with
Australian Wheel Clamp
security option Supreme.

Four Winns Boat Trailer secured with Australian Wheel Clamp security option Supreme.

6: How to fit the Boat Trailer Wheel Clamp security option Supreme to Four Winns Boat Trailer using fitting method one.

Step 1
Stand the Steel Shield in front of the Wheel.

Stand the Steel Shield in front of the Wheel.

Step 2
Place the Chain through the two bottom holes in the Steel Shield.

Place the Chain through the two bottom holes in the Steel Shield.

NB: Step 2 - We suggest to save you a few seconds while fitting the Australian Wheel Clamp security option Supreme place a piece of coloured tape or twist a short piece of wire, as seen in the pictures, or similar around the middle link in the length of Chain. This will enable you to quickly centralize the Chain in the centre of the Steel Shield.

Step 3
On the left side pass the Chain under then over the vehicle's leaf springs or tubular frame then through the top hole.

On the left side pass the Chain under then over the vehicle's leaf springs or tubular frame then through the top hole.

Step 4
Repeat the same procedure on the right side as per Step 2.

Repeat the same procedure on the right side as per Step 3.

Step 5
Grip both ends of the Chain and pull to make the Chain taut.

Grip both ends of the Chain and pull to make the Chain taut.

Back of the Wheel showing how the High Tensile Chain is wrapped round the leaf springs securing the Steel Shield to the Wheel and to the vehicle’s chassis plus covering the Wheel nuts at the front of the Wheel.

Back of the Wheel showing how the High Tensile Chain is wrapped round the leaf springs securing the Steel Shield to the Wheel and to the vehicle’s chassis.

Step 6

Locking the Australian Wheel Clamp security option Supreme with the patented Steel Shroud and customised Padlock, it will only take a few times to get the hang of it.

Padlock Protection Steel Shroud partially assembled.

Australian Wheel Clamp security option Supreme Padlock Protection Steel Shroud partially assembled.

1st: Place both ends of the Chain in the slot on each side of the Steel Shroud.

2nd: Place the removable Shackle in the holes at the top of the Steel Shroud.

3rd: Hold the Steel Shroud in your hand and place a couple of fingers over the top of the Shackle. Look at the opposite end of the Steel Shroud to make sure the Shackle is in the centre then insert the Padlock Body in the hole at the bottom of the Steel Shroud. To lock the Padlock turn the key while pushing the Padlock into the Shackle.

Note: The padlock's Shackle only fits into the Padlock body one way, you have to remember the correct way, here's a couple of suggestions:

Simple to fit to a Wheel.

Takes about 20 - 30 seconds.

STOPS all methods used to break a Padlock
and cut Chain.

Australian Wheel Clamp
security option Supreme.

Australian Wheel Clamp security option Supreme.

Security Rating
Ultimate Protection
STOPS all methods 99% of all thieves use to cut Chain
or break a Padlock.

PLUS
it is QUICK and simple to fit to and remove from a Wheel.

Four Winns Boat Trailer
is now protected.

Four Winns Boat Trailer
secured with
Australian Wheel Clamp
security option Supreme.

Four Winns Boat Trailer secured with Australian Wheel Clamp security option Supreme.

I trust if you own or are thinking about purchasing a Four Winns Boat Trailer you seriously consider purchasing Boat Trailer Wheel Clamp, security option Supreme to stop it being stolen.

As an incentive the Australian manufacturer of:
Boat Trailer Wheel Clamp
is offering you a
direct special offer.

Today's special a few lines down.

If you want to speak to the Australian manufacturer
please telephone us on our
free call number.

If you gained knowledge from reading this page
please email this page link to a friend, thank you.

Or...

Share this link
www.boat-trailer-wheel-clamp.com.au/articles-2016/four-winns-boats.php
on your favourite social network.

Until next week's article

If you have a question or comment about the above article or if you want information about the Boat Trailer Wheel Clamp or any of the Theft Proof Security Products listed below please send us an email.

Article Archive

Do not become a victim of crime. Lock it or risk it being stolen.

Australian Manufacturer Direct Special Offer

Sunday September 25, 2016 between 10.30am to 9.30pm

save $170 or $188

Plus next day free delivery anywhere in Australia.

Interested...

Read our offer Now...

...What To Do Next...

Theft Proof Security Products Web Sites

All links below open in a new window.

Padlock Protection designed to replace a Padlock and Mild Steel Chain.

Padlock Guard designed to protect your Padlock being broken by thieves.

Learn about how High Tensile Chain cannot be cut with a Bolt Cutter, while you are at the site let us give you a quotation.

Hide Away Safe - High Security, Light-Weight, Virtually Indestructible Safe

High Security, Light-Weight
Virtually Indestructible Safe

Caravan Safe showing the four removable insert boxes.

Hide Away Safe showing Docking Station and four removable insert boxes.

Data Security Safe will secure up to 52 CD's or DVD's or up to six 2.5 inch external hard drives.

Handgun Safe with Foldback Handle securing two handguns.

Laptop being placed inside the Laptop Safe.

Easy DIY Installation in:
Residential Homes, Vehicles
Caravans, Motor Homes, RV’s, Offices, Factories and Boats.

If you don't need any more information to make a decision to purchase.

Site Map

Copyright © 1994 – 2016
Speculator Holdings Pty Ltd

Last Updated
Sunday September 25, 2016